1. “New” 5″ Round Tight Radius Canopy Series – 45, 46
2. 5″ Flat Square Canopy w/ Mounting Holes Series – 243B SQ RM, 240B SQ RM, 241B SQ RM & 242B SQ RM
3. 5″ Flat Square Canopy w/ Slots & RM Holes Series – 240B SQ SL RM, 241B SQ SL RM, 242B SQ SL RM & 243B SQ SL RM
4. 93B SQ SL
5. Glass Cap
6. 5″ Flat Canopy Series – 82B, 93B, 83B, 83B-.625, 84B, 118B, 85B, 94B, 91B, 98B, 86B, 95B, 92B, 99B, 94B DF, 95B DF
7. 5″ Flat Round Canopy w/ Mounting Holes Series – 243B RM
8. 5″ Square Flat Canopy Series –  82B SQ, 93B SQ, 83B SQ, 83B-.625 SQ, 84B SQ, 118B SQ, 85B SQ, 94B SQ, 91B SQ, 98B SQ, 86B SQ, 95B SQ, 95B SQ DF, 92B SQ, 99B SQ, 276B SQ, 277B SQ, 278B SQ, 279B SQ
9. 4″ Flat Canopy Series – 223B, 225B, 224B, 227B
10. 5″ Flat Canopy W/Slip Ring Series – 87B, 88B, 146B
11. 2″ Flat Canopy Series – 89B & 90B
12. 2″ Square Flat Canopy Series – 89B SQ & 90B SQ
13. Shallow Canopy Series – 47B, 97B, 117B
14. Shallow Canopy W/Slip Ring Series – 48B, 72B, 149B
15. 52
16. Deep Twin Canopy Series – 11 & 11A
17. Deep Canopy Series – 40B, 42B, 43B
18. Deep Canopy W/Slip Ring Series – 41B & 168B
19. Phil Tap Cap – Philips Screw Tap Cap

1. MP Crossbar Round – Mono Point Crossbar, Universal slotted screw mounting for 4″ octagonal (round)
2. MP Crossbar – Universal slotted mounting screw pattern for 4″ octagonal (round) or 4″ square junction box mounting
3. MP Plates 1/2″ IP, 3/8″ IP, 1/4″ IP, 1/8″ IP and HB – Mono Point center mounting plates for MP Crossbar
4. MP Swivel Clip – Mono Point Swivel Retaining Clip for MP-Plate HB
5. 158 – 1/4-20 Flat Tapped Countersunk Crossbar
6. 57 – 1/4-20 Flat Tapped Crossbar
7. 108 – Heavy Duty 1/4″ -20 Flat Tapped Crossbar
8. 58 – 1/8″ IP Flat Tapped Crossbar
9. 178 – Heavy Duty 1/8″ IP Tapped Crossbar
10. 39 – 1/4″ IP Tapped Crossbar
11. 38 – 3/8″ IP Flat Tapped Crossbar
12. 159 – 1/2″ IP Flat Tapped Crossbar
13. 143 – 1/2″ IP Slip Center Hole Universal Crossbar
14. 66 – 1.8″ Center Hole Universal Crossbar
15. 19 – 3/8″ IP Twin Stem Crossbar
16. 33 – Swivel Crossbar
17. 15 – 3/8″ IP Slip Crossbar
18. 67 – 1/4″ IP Slip Crossbar
19. 68 – 3/8″ IP Slip Crossbar
20. Flash Plate –  For #33 & #15 Crossbars

1. 5″ Flat Square Canopy w/ Mounting Holes Series – 243B SQ RM, 240B SQ RM, 241B SQ RM & 242B SQ RM
2. 5″ Flat Square Canopy w/ Slots & RM Holes Series – 240B SQ SL RM, 241B SQ SL RM, 242B SQ SL RM & 243B SQ SL RM
3. 93B SQ SL – 5″ Flat Square Canopy w/ Slots
4. MP Crossbar Round – Mono Point Crossbar, Universal slotted screw mounting for 4″ octagonal (round)
5. MP Crossbar – Universal slotted mounting screw pattern for 4″ octagonal (round) or 4″ square junction box mounting
6. MP Plates 1/2″ IP, 3/8″ IP, 1/4″ IP, 1/8″ IP and HB – Mono Point center mounting plates for MP Crossbar
7. MP Swivel Clip – Mono Point Swivel Retaining Clip for MP-Plate HB
8. Exit Base – Exit Bracket Base with 6/32″ Slip and Tapped Holes
9. Exit BRKT 1/4 IP – Exit Bracket with 1/4″ IP Tapped Center Hole & 6/32″ Tapped Holes
10. 5″ Flat Round Canopy w/ Mounting Holes Series – 243B RM
11. Exit BRKT 1/8 IP –  Exit Bracket with 1/8″ IP Tapped Center Hole & 6/32″ Tapped Holes
12. Exit BRKT 3/8 IP – Exit Bracket with 3/8″ IP Tapped Center Hole & 6/32″ Tapped Holes
13. MP Screw – 6/32″ Machine screw

1. 109 – 1/4-20 Hanger Bolt for Wood
2. TC Base, TC Base – .380, TC Base – .5  & TC Base – 1 – Track Clip and Gripper Bases for Slot of Extrusion on Track Lighting
3. CG Coupler – For CG Cap
4. Key Snap – Key Snap Clip
5. Glass Cap –  For the top of Fixtures or Glassware
6. TS 1/4″-20 – 1/4″-20 Male Cross Cable Coupler
7. TS 1/4″-20-TH – 1/4-20 Bolt w/Thru Hole for Cable
8. MP Screw – 6/32″ Machine screw
9. 110 – 1/4-20 Stud Support Clip for T-Bar
10. 138 – 1/4-20 Stud on  a Twist Clip for T-Bar
11. 217, 219 & 194 – 8/32″ Flat Philips Head Screws
12. 183 – 8/32″ Philips Head EXT Sems Screw
13. 35 – 1/4″ IIP Half Ball
14. 34 – 3/8″ IP Half Ball
15. 35 ADJ – 1/4″ IP Slip Half Ball
16. 34 ADJ – 3/8″ IP Slip Half Ball
17. ADJ-SS – 1/4-20 Short Socket Set Screw for ADJ Series Half Balls
18. SSS – 1/4-20 Socket Set Screw for ADJ Series Half Balls
19. 147 – 1/2″ IP Half Ball
20. 23 & 55 – Rectangular Flange with 3/8″ IP or 1/4″ IP Tapped Center Hole
21. 161 & 162 – Diamond Flanges with 1/4″ IP or 3/8″ IP Tapped Center Holes
22. 18 – Hang Straight
23. 80 & 81 – Stud Extension
24. 235 – #8 Self Tapping Screw
25. 132 –  Electrical Support Box Clip
26. 6″ Safety Chain – Piece of Jack Chain
27. Phil Tap Cap – Philips Screw Tap Cap
28. Spring Clip – Spring Snap
29. 3/4 Hook – 3/4″IP High Bay Hook W/ Set Screw
30. EXT Bracket – For Vapor-Tite Bodies
31. 110 BS – 1/4-20 Stud Support Clip for T-Bar
32. Adjuster Clip – Used With MGR-SE 10/32 SM
33. Magnet – #6 & #8 Holes

1. 141 – 1/2″ IP Nipple
2. 26 – 3/8″ IP Nipple
3. 49 – 1/4″ IP Nipple
4. 60 – 1/8″ IP Nipple
5. Nipple Lock – 3/8″ IP Nipple W/Lock Nut

1. Knurled Nut 1/8 IP – 1/8″ IP Knurled Nut
2. Knurled Nut 1/4 IP – 1/4″ IP knurled Nut
3. Knurled Nut 3/8 IP – 3/8″ IP Knurled Nut
4. Knurled Nut 1/2 IP – 1/2″ IP Knurled Nut
5. 51 – 1/4″ IP Knurled Nut
6. 133 – 1/8″ IP Hex Nut
7. 25 – 1/4″ IP Hex Nut
8. 64 – 1/4″ IP Hex Nut
9. 20 – 3/8″ IP Hex Nut
10. 22 – 3/8″ IP Lock Nut
11. 77 – 1/2″ IP Lock Nut
12. 78 – 1/2″ IP Sealing Lock Nut
13. 192 – 5/16″ Jam Panel Nut
14. 104 – 1/4-20 Keps Nut
15. 170 – 1/4-20 Acorn Nut
16. CCN – 1/4-20 Center Cap Nut
17. 187 – 8/32″ Cap Nut
18. 134 – 1/8″ IP Cap Nut
19. 135 – 1/8″ IP Cap Nut
20. 186 – 1/8″ IP Cap Nut
21. 50 – 1/4″ IP Cap Nut
22. 70 – 3/8″ IP Cap Nut
23. 131 – 1/2″ IP Cap Nut
24. 236 – 1/4″ Lock Washer
25. 24 – 3/8″ IP Slip Washer
26. 54 – 1/4″ IP Slip Washer
27. 124 – 1/4-20 Washer

1. 142 – 1/2″ IP Slip Ring
2. 14 – 3/8″ IP Slip Ring
3. 12-.625 – 1/4″ IP Slip Ring
4. 160 – 1/8″ IP Slip Ring
5. 144 – 1/2″ IP Coupler
6. 16 – 3/8″ IP Coupler
7. 16L – 3/8″ IP Coupler
8. 17 – 1/4″ IP Coupler
9. 17L – 1/4″ IP Coupler
10. 17ML – 1/4″ IP Coupler
11. 188 – 3/8″ IP Slip Ring
12. 31 – 1/4″ IP Slip Ring
13. 28, 140, 177 – C Hickeys (Clink on Links for Sizes)
14. 27, 21, 36P, 36 – Hook Hickeys (Click on Links for Sizes)
15. 29, 163, 164 – Barrel Hickeys (Click on Links for Sizes)

1. CG Cap – Cord Grip for SVT Style Cords
2. CG Check Ring – Spacer for CG CAP
3. CG Coupler – For CG Cap
4. Cord Grip – 3/8″ IPS Thread for 18/3
5. 237 – 875″ Hole Bushing
6. 247, 152, 216 & 229 – Hole Snap Bushings (Click on Links for Sizes)
7. 102 – Strain Relief 5/8 PF Hole for 18/3 & 18/4 Cord
8. 248 – Lock-It style Strain Relief for SVT Cord
9. 171 – Strain Relief 7/8 PF Hole for 18/3 & 18/4 Cord
10. 126 – Strain Reliefs 7/8 PF Hole for 12/3,14/3, 14/4, & 18/5 Cords
11. 154 – 1/2″ Hole Split Bushing
12. 153 & 234 – Nylon Natural Cord Strap for 18/3 SVT & SJT Cord
13. 151 – 1/4″ Hole Plug
14. 169 – 7/32″ Hole Plug
15. 111 – Cable Tie
16. 131 – 1/2″ Bushing
17. 213 & 252 – Metal Strain Reliefs for SJT Cord
18. 260 – Strain Relief 7/8 PF Hole for 14/4, 14/2, 12/2, & 12/4 Cord
19. Cord Grip 1/2 IP – 1/2″ IPS Thread for AMW, SJT and SVT Cord

• SB 1/4 x ST 1/4 – 1/4″ IP Swivel Top Half Ball
• SB 1/4 x ST 3/8 – 3/8″ IP Swivel Top Half Ball
• SB 1/4 x ST 1/2 – 1/2″ IP Swivel Top Half Ball

3/8″ IP Swivel Bottom

• SB 3/8 x ST 1/4 – 1/4″ IP Swivel Top Half Ball
• SB 3/8 x ST 3/8 – 3/8″ IP Swivel Top Half Ball
• SB 3/8 x ST 1/2 – 1/2″ IP Swivel Top Half Ball

1/2″ IP Swivel Bottom

• SB 1/2″ x ST 1/4 – 1/4″ IP Swivel Top Half Ball
• SB 1/2 x ST 3/8 – 3/8″ IP Swivel Top Half Ball
• SB 1/2 x ST 1/2 – 1/2″ IP Swivel Top Half Ball