• There are two types of tracks that are used in track lighting. The attachment method to the track will vary slightly for each type.

Track Attachments

• Flat Back Basic Track

1. MGR-SE 8/32 (Power Feed)
2. MGR-SE 8/32 (Non-Feed)

 

• Track Clip for Extrusion Slots

 

1. TC- .380 Mounting (10/32)
2. TC- .5 Mounting (1/4-20)
3. TC-1 Mounting (1/4-20)
4. TC-1.1 Mounting (1/4-20)

Feed Kit Mounting

• Track Feed Kits can be setup to have a mounting point come right off the center of a J-Box or can be all Non-Feed Kits with the purchase of the cord and strain reliefs separately to take the cord up one of the cables to a J-Box mounted nearby in the ceiling. The conductors typically must be 14 or 12 Gage as the wire must be sized the same as Branch Circuit.

 

• Power Feed Loop End

1. Flat Track – 12/3 Cord & 12/4 Cord
2. Extruded Track – 12/3 Cord & 12/4 Cord

• Power Feed Unistrut Mount 

1. Flat Track – 12/3 Cord & 12/4 Cord
2. Extruded Track – 12/3 Cord & 12/4 Cord

• Power Feed J-Box Mount

1. Flat Track – 12/3 Cord & 12/4 Cord
2. Extruded Track – 12/3 Cord & 12/4 Cord

Non-Feed Mounting

• Non-Feed CC1-8 SO Mount

1. Flat Track
2. Extruded Track

• Non-Feed Concrete Mount

1. Flat Track
2. Extruded Track

• Non-Feed Loop End

1. Flat Track
2. Extruded Track

• Non-Feed Sheetrock Mount

1. Flat Track
2. Extruded Track

• Non-Feed Unistrut Mount

1. Flat Track
2. Extruded Track

• Non-Feed Lag Screw Wood Mount

1. Flat Track
2. Extruded Track

• Non-Feed Ceiling Pan Mount

1. Flat Track 
2. Extruded Track