1. Cord Kit Mini

• Low Profile cord kit utilizing a decorative strain relief that will fit .190″-.260″ diameter Round Cords. Available in White, Black, Nickel, & Brushed Nickel

 

 

2. Cord Kit SVT

• Cord Kit utilizing a compression strain relief that will fit .190″-.260″ Round Cords. Canopy mounts with 2- 8/32″ Cap Nuts. Available in White, Black, Nickel, & Brushed Nickel

3. Cord Kit SVT CP

• Cord Kit utilizing a compression strain relief that will fit .190″-.260″ Round Cords. The Kit also contains a strain relief and coupler for the top of the fixture. Canopy mounts with 2- 8/32″ Cap Nuts. Available in White, Black, Nickel, & Brushed Nickel

4. Blank -Up

• Canopy Kit for blanking off an Octagonal Junction Box that will have a cord coming from it. Strain reliefs will fit .290″-.385″ diameter cords

5. Blank-Up 12/3

• Canopy Kit for blanking off an Octagonal Junction Box that will have a cord coming from it. Strain reliefs will fit .380″-.450″ diameter cords

6. Cord Kit

• Cord Kit utilizing a 3/8″ IP compression srtain relief that will fit .105″-.315″ diameter Round Cords. Available in White, Black, & Gray

7. Cord Kit 1/2IP

• Cord Kit utilizing a 1/2″ IP compression strain relief that will fit .170″-.450″ diameter Round Cords. Available in White, Black, & Gray

 

8. Cord Kit GS

• Low Profile cord kit utilizing a decorative strain relief that will fit .190″-.260″ diameter Round Cords. Stud is used for grounding the kit. Available in White, Black, Nickel, & Brushed Nickel

Helpful Code Information

• UL1598
  10.2.12 A flexible cord providing the sole support of a luminaire or luminaire part shall not be subjected to kinks or sharp edges, and shall not be at least:
  (a) a not-for-hard-usage jacketed type if supporting a mass of 2.3 kg (5lb) or less (SVT) or;
  (b) a hard-usage jacketed type if supporting a mass of 4.5 kg (10 lb) or less (SJT)