CABLE CANOPY KIT MATRIX
Cable Kits provide a complete solution for clean and fast installation method for hanging fluorescent direct/indirect type fixtures. They come complete with a suitable gripper for a tool-less height adjustment of fixture as well as a hardware set suitable for ceiling type and are available with cord feed for power supply to fixture.
*For Magnet Mounted Kits ADD (MM) in place of (CC).
ex. MM450/50-16
Please find a few sample Feed Kits and Non-Feed Kits.
Our cable kit numbering system is designed like this
Step 1: Gripper
The Gripper will be determined by the mounting KO’s size or brackets on the fixture. The kit will contain the matching fastener or Locknut that goes with the Gripper. See the options below to build your canopy set. For a detailed description of the grippers, select Model# link.
| # | Gripper Model # | CableExit | Hole Size |
| 1 | MGR 1/4-20 | Bottom | .250” |
| 2 | MGR-SE-1/4-20 | Side | .250” |
| 3 | GR1/4IP-TN | Bottom | .562” |
| 4 | GR1/4IP | Bottom | .562” |
| 5 | GR3/8IP | Bottom | .687” |
| 6 | GR1/2IP | Bottom | .875” |
| 7 | GR1/4IP-TN-L | Bottom | .562” |
| 8 | MGR-1/4-20-M NK | Bottom | .250” |
| 9 | MGR-SE-1/4-20-BS | Side | Cross |
| 12 | MGR1/8IP | Bottom | .400” |
| 13 | MGR-SE-1/8IP | Side | .400” |
| 14 | MGR-SE-1/4-20-EXT | Side | .250” |
| 15 | MGR-SE-TH w/ Crosscable | Side | Cross |
| 16 | GR-SE-BF | Side | Cross |
| 17 | Micro-GR | Bottom | .312 |
| 18 | MGR 1/8IP ALL | Bottom | .400” |
| 19 | MGR-SE-TH10/32 Block | Side | .250” |
| 20 | MGR 10/32 | Bottom | .187” |
| 21 | MGR-SE10/32 ASS | Side | .187” |
| 23 | MGR-SE 8/32 | Side | .187” |
| 24 | MGR-SE 10/32 SM | Side | .187” |
| 25 | MGR-SE 1/4-20-Ext-M | Side | .250” |
| 26 | MGR-Hook | Bottom | Loop |
| 27 | GR-SE 1/4 Combo | Side | .25/.5” |
| 28 | MGR-SE10/32 ASS ANG | Side | .187” |
| 29 | MGR-10/32 NK | Bottom | .187” |
| 30 | MGR-SE-ADJ-SHOE | Side | .125” w/slot |
| 31 | MGR-SE-THW/8″CabDB64 | Side | .225” keyhole.11” hole diameter |
| 32 | MGR 1/4-20 M | Bottom | .250” |
| 33 | MGR-SE 10/32 EXT | Side | .187” |
| 34 | MGR-SE 8/32 SH | Side | .187” |
| 37 | MGR-SE-360 1/4-20 | Side | .250” |
| 38 | MGR-SE-360 8/32 | Side | .187” |
| 39 | MGR CC 1/4-202P NK | Bottom | .250” |
| 40 | MGR CC 1/4-02 M | Bottom | .250” |
| 41 | MGR-SE 1/4-20-M | Side | .250” |
| 42 | GR 3/8 IP ALL | Bottom | .687” |
| 43 | GR 1/4 IP ALL | Bottom | .562” |
| 44 | AL LG 1/16 | 2 way | N/A |
| 45 | AL LG 3/32 | 2 way | N/A |
| 46 | AL LG 1/8 | 2 way | N/A |
| 47 | MICRO-SE-TH w/8″ Cable | Side | Cross |
| 48 | MICRO-SE-TH w/8″ Cable PD | Side | Cross |
| 49 | MICRO-SE-TH w/24″ Cable sw-eye | Side | Cross |
| 50 | MICRO SE 8/32 | Side | .187″ |
| 51 | MICRO SE Panel | Side | N/A |
| 52 | MICRO SE 360 8/32 | Side | .187″ |
| 53 | MICRO Ball | Bottom | N/A |
| 54 | MGR-SE 360 1/4-20 LN | Side | .250″ |
Step 2: Hardware Set
Use the Series# to select the hardware kit. To see an example, click on the Series# link.
| # | Description |
| Non-Feed Kits | |
| 20 | 5″ Canopy, Crossbar, 1-Piece Cable Coupler |
| 22 | 5″ Canopy, Crossbar, 2–Piece Cable Coupler |
| 24 | 5″ Canopy, T-Bar Clip, 1-Piece Cable Coupler |
| 25 | 5″ Canopy, T-Bar Clip, 2-Piece Cable Coupler |
| 28 | 2″ Canopy, T-Bar Clip, 1-Piece Cable Coupler |
| 35 | #112 Loop Adapter is used to make loop over Building Structure |
| 36 | 1-Piece Cable Coupler W/1/4” Bolt to hang from Unistrut |
| 37 | 2” Canopy, 1-Piece Cable Coupler , 1/4”-20 stud for Masonry Fasteners |
| 38 | 2” Canopy, 1-Piece Cable Coupler, Lag Screw for wood |
| 39 | 2” Canopy, 1-Piece Cable Coupler, Lag Screw & Toggle Butterfly (Drywall) |
| 41 | CC 1/8 Stand Off w/Drywall Fasteners |
| 43 | Loop End Cable with Gripper |
| 45 | Ceiling Pan Mount with Paddle |
| Feed Kits No Cord Sets | |
| 21 | 5” Canopy Crossbar, 2-Piece Cable Coupler J-Box Mounting |
| Feed Kits w/ Straight Cord Sets | |
| 26 | 5″ Canopy, Crossbar, 2-Piece Cable Coupler, 18/3 Straight Cord J-Box Mounting |
| 27 | 5″ Canopy, Crossbar, 2-Piece Cable Coupler, 18/4 Straight Cord J-Box Mounting |
| 40 | 5″ Canopy, Crossbar, 2-Piece Cable Coupler, 18/5 Straight Cord J-Box Mounting |
| 42 | 5” Canopy, Crossbar, 2 Piece Cable Coupler, 18/6 Straight Cord J-Box Mounting |
| 44 | 5” Canopy, Crossbar, 2 Piece Cable Coupler, 18/2 Straight Cord J-Box Mounting |
| 50 | 5” Canopy, Crossbar, 2 Piece Cable Coupler, 18/3 & 22/2 Straight Cord J-Box Mounting |
| 51 | 5” Canopy, Crossbar, 2 Piece Cable Coupler, 18/4 & 22/2 Straight Cord J-Box Mounting |
| 52 | 5” Canopy, Crossbar, 2 Piece Cable Coupler, 18/4 & 22/4 Straight Cord J-Box Mounting |
| 53 | 5” Canopy, Crossbar, 2 Piece Cable Coupler, 18/4 AWM Straight Cord J-Box Mounting |
| 54 | 5” Canopy, Crossbar, 2 Piece Cable Coupler, 22/2 AWM Straight Cord J-Box Mounting |
| 55 | 5” Canopy, Crossbar, 2 Piece Cable Coupler, 22/4 AWM Straight Cord J-Box Mounting |
| 56 | 5” Canopy, Crossbar, 2 Piece Cable Coupler, 18/5 & 22/4 Straight Cord J Box Mtg |
| 57 | 5” Canopy, Crossbar, 2 Piece Cable Coupler, 18/7 Straight Cord J Box Mtg |
| Feed Kits w/ Coil Cord Sets | |
| 31 | 5″ Canopy, Crossbar, 2-Piece Cable Coupler, 18/3 Coil Cord J-Box Mounting |
| 32 | 5″ Canopy, Crossbar, 2-Piece Cable Coupler, 18/4 Coil Cord J-Box Mounting |
Step 3: Cable Length
All Stock Cables are 1/16″ Galvanized w/Molded Cable Stop on One End. 3/64″ & 3/32″ Cables are available please consult factory on availability.
| # | Description |
|---|---|
| 6 | 6” Long Cable |
| 24 | 24” Long Cable |
| 36 | 36” Long Cable |
| 50 | 50” Long Cable |
| 72 | 72” Long Cable |
| 100 | 100” Long Cable |
| 120 | 120” Long Cable |
| 150 | 150” Long Cable |
| 200 | 200” Long Cable |
| 250 | 250” Long Cable |
| 300 | 300” Long Cable |
| 350 | 350” Long Cable |
Step 4: Cable Diameter
| # | Description |
|---|---|
| 16 | 1/16″ Diameter |
| 32 | 3/32″ Diameter |
| 64 | 3/64” Diameter |
| 132 | 1/32″ Diameter |
Step 5: Options
Available variations of options on kits.
| # | Description | |
| 12 | 12 Power cord | |
| 8.5HB | 8.5” Crosscable W/ #2 HB Ends | |
| 10HB | 10” Crosscable W/ #2 HB Ends | |
| 12.5HB | 12.5” Crosscable W/ #2 HB Ends | |
| 18HB | 18” Crosscable W/ #2 HB Ends | |
| 24HB | 24” Crosscable W/ #2 HB Ends | |
| 36HB | 36” Crosscable W/ #2 HB Ends | |
| 8CC | 8”Crosscable with 1/4-20TH Studs | |
| 12CC | 12”Crosscable with 1/4-20TH Studs | |
| 18CC | 18”Crosscable with 1/4-20TH Studs | |
| 24CC | 24”Crosscable with 1/4-20TH Studs | |
| 8PD | Paddles on the ends of 8” Crosscable | |
| 12PD | Paddles on the ends of 12” Crosscable | |
| 36PD | Paddles on the ends of 36” Crosscable | |
| 6Y | 6” Legs on Y Paddle Assembly | |
| 18Y | 18” Legs on Y Paddle Assembly | |
| 7/8 KO | Strain Relief for 7/8 Knock Out | |
| BK | Black Canopy Set | |
| BN | Brushed Nickel Canopy Set | |
| CG | Ceiling Mounted Gripper | |
| CH | Cord Holder | |
| CL | Clear Power Cord | |
| CP8 | Cable Puck with 8 Inch Legs | |
| CP12 | Cable Puck with 12 Inch Legs | |
| CP16 | Cable Puck with 16 Inch Legs | |
| CP8-4 | Cable Puck 4 with 8 Inch Legs | |
| CP12-4 | Cable Puck 4 with 12 Inch Legs | |
| CP16-4 | Cable Puck 4 with 16 Inch Legs | |
| CS | Slot Cable Coupler allowing cable to hang straight on vaulted ceiling | |
| DF | Dual Feed w/ 2-Cord From 1-Canopy | |
| HK | Snap Hook 1/4”-20 | |
| M2D4 | Multi-Mount 2-Cables 4” Spacing | |
| M3D4 | Multi-Mount 3-Cables 4” Spacing | |
| M4D4 | Multi-Mount 4-Cables 4” Spacing | |
| MB | Metal Braided Power Cord | |
| NK | Nickel Canopy Set | |
| PC | Powder Coated Hardware | |
| PF | Creates side hole for power cord entrance w/ Power Feed Tube | |
| RM | Row Mount | |
| SH | Shade Holder Accessory for capturing Wire Frame | |
| SM | Canopy .250” Holes on 3.5” Center | |
| SQ | Square Canopy | |
| UV | Universal | |
| TC 1 | Track Clip Mounting TC-1 | |
| TC .5 | Track Clip Mounting TC-.5 | |
| TC .38 | Track Clip Mounting TC-.380 | |
| FP | Flat Panel Series | |
| Micro | 3.5″ Canopy Series |