Cable Gripper Couplers, Swivel Canopy Set, Pendant Stems, High Bay Kits, Exit Lighting, Aircraft Cable Suspension

Cable Canopy Kit Matrix

Cable Kits provide a complete solution for clean and fast installation method for hanging fluorescent direct/indirect type fixtures. They come complete with a suitable gripper for a tooless height adjustment of fixture as well as a hardware set suitable for ceiling type and are available with cord feed for power supply to fixture.

There are 3 ways you can use our Cable Canopy Kit Matrix: PDF, Excel, or following the instructions below. Once you have made your selections, please contact us to submit your order. Due to customization, we are not able to transact your purchase online.

Pendant Systems Cable Canopy Kit Ordering Matrix

Our cable kit numbering system is designed like this:

Step 1: Gripper: The Gripper will be determined by the mounting KO's size or brackets on the fixture. The kit will contain the matching fastener or Locknut that goes with the Gripper. See the options below to build your canopy set. For a detailed description of the grippers, select Model# link.

Gripper#	Model#	KO Size	Description of Gripper
1	MGR 1/4-20	0.250"	Male 1/4"-20 Stud Bottom Exit
2	MGR-SE-1/4-20	0.250"	Female 1/4"-20 Side Exit
3	GR1/4IP-TN	0.562"	1/4"IP Male Bottom Exit w/Knurled Top Nut
4	GR1/4IP	0.562"	1/4"IP Male Threaded Bottom Exit
5	GR3/8IP	0.660"	3/8"IP Male Threaded Bottom Exit
6	GR1/2IP	0.875"	1/2"IP Male Threaded Bottom Exit
7	GR1/4IP-TN-L	0.562"	1/4"IP Male Bottom Exit w/Knurled Top Nut
8	MGR-SE-M-4	0.1875"	M-4 Female Side Exit Screw included
9	MGR-SE-1/4-20-BS	Cross Cables	Fork W/ Bottom Allen Set Screw included
10	MGR-SE-ADJ-1/4-20	0.250"	1/4"-20 Female Adjustable
11	MGR-SE-ADJ-8/32	0.1875"	8/32" Female Adjustable
12	MGR-1/8IP	0.400"	1/8"IP Male Threaded Bottom Exit
13	MGR-SE-1/8IP	0.400"	1/8"IP Male Threaded Side Exit
14	MGR-SE-1/4-20-EXT	0.250"	Male 1/4"-20 Side Exit
15	MGR-SE-TH	Cross Cables	Side Exit w/Captive Cross Cable
16	GR-SE-BF	Cross Cables	.225 Slot W/8/32" Set Screw
17	Micro-GR	0.312"	Micro Gripper for 3/64" Cable
18	MGR 1/8IP All	.400"	1/8"IP Male Threaded OD Bottom Exit
19	GR 1/4IP SR	.562"	1/4"IP Male Threaded Bottom Exit
20	MGR 10/32	.187"	Male 10/32" Bottom Exit
21	MGR-SE 1/4-20 TH	.250"	Side Exit 1/4"-20 Tapped Thru Hole
22	KL100	-	Two way cable fastener
23	MGR-SE 8/32	.187"	Female 8/32" Side Exit
24	MGR-SE 10/32 SM	.1875"	Side Exit Side Mount 10/32"
25	MGR-SE1/4-20 EXT-M	.250"	Side Exit 1/4"-20 Male
26	MGR-Hook	N/A	Gated Snap Hook
27	GR-SE 1/4 Combo	.25" / .5"	Side Exit 1/4"IP Male OD 1/4"-20 Tap

Step 2: Hardware Set - Use the Series# to select the hardware kit.� To see an example, click on the Series# link.

Series #	Non Feed Kits
22	5"Canopy, 2-Piece Cable Coupler, Crossbar
24	5"Canopy 1-Piece Cable Coupler, T-Bar Clip
25	5"Canopy, 2-Piece Cable Coupler, T-Bar Clip
28	2"Canopy, 1-Piece Cable Coupler, T-Bar Clip
35	#112-C-Loop used to make loop over ceiling structure
36	1-Piece Cable Coupler W/1/4"-20 Bolt and Washer to hang from Unistrut
37	2"Canopy,1-Piece Cable Coupler W/1/4"-20 Stud to hang from Masonary Fasteners
38	2"Canopy, 1-Piece Cable Coupler, Lag Screw (Wood)
39	2"Canopy, 1-Piece Cable Coupler, Lag Screw & Toggle Butterfly (Drywall)
�	Feed Kits No Cords Sets
21	5"Canopy, Crossbar, 2-Piece Cable Coupler
�	Feed Kits
26	5"Canopy, Crossbar, 2-Piece Cable Coupler, 18/3 Straight Cord
27	5"Canopy, Crossbar, 2-Piece Cable Coupler, 18/4 Straight Cord
�	Feed Kits W/ Coil Cord Sets
31	5"Canopy, Crossbar, 2-Piece Cable Coupler, 18/3 Coil Cord
32	5"Canopy, Crossbar, 2-Piece Cable Coupler, 18/4 Coil Cord

Step 3: Cable Length

All Stock Cables are 1/16" Galvanized w/Molded Cable Stop on One End.
3/64" & 3/32" Cables are available please consult factory on availability.

Cable Length

Length of Cable

6

6" Long Cable

24

24" Long Cable

36

36" Long Cable

50

50" Long Cable

72

72" Long Cable

100

100" Long Cable

120

120" Long Cable

150

150" Long Cable

200

200" Long Cable

250

250" Long Cable

300

300" Long Cable

350

350" Long Cable

Step 4: Gripper & Cable Weight Suspension - 1/16" cable is standard cable normally used

Cable Diameter	Gripper Series / Type	Suspension Weight
3/64" Galvanized	MGR or Micro	25 Lbs
1/16" Galvanized (Std)	MGR	40 Lbs
1/16" Galvanized (Std)	GR	50 Lbs
3/32" Galvanized	GR	100 Lbs

Based on a 5:1 Ratio Safety Factor

Step 5: Cable Diameter

16 = 1/16" Cable
64 = 3/64" Cable
32 = 3/32" Cable

Step 6: Options - Available variations of options on kits.�Maximum number of options is 3.

Option	Description
SQ	Square Canopy
SM	Canopy Side Mount W/8/32"Screw & Cap Nuts on 2 3/4"Centers
M2D4	Multi-Mount W/2-Cables with 4" Diameter Spacing Between Cables
M3D4	Multi-Mount W/3-Cables with 4" Diameter Spacing Between Cables
M4D4	Multi-Mount W/4-Cables with 4" Diameter Spacing Between Cables
PC	Powder Coated Canopy Hardware
BK	Black Canopy, Power Cord, Cable Ties and Strain Reliefs
CL	Clear Power Cord
CS	Cable Slot Cable Coupler for allowing cable to hang straight on vaulted ceiling
MB	Metal Braided Power Cord
PF	Tube with Side Hole for entrance of Power Cord
SVT	SVT Style Power Cord (Thinner Diameter .250")
12	12 Gage Conductor on Power Cord
8Cross	8" Crosscable W/ 1/4"-20TH Studs captive on Crosscable
12Cross	12" Crosscable W/ 1/4"-20TH Studs captive on Crosscable
18Cross	18" Crosscable W/ 1/4"-20TH Studs captive on Crosscable
24Cross	24" Crosscable W/ 1/4"-20TH Studs captive on Crosscable
10HB	10"Crosscable W/#2 Halfball Ends
12.5HB	12.5"Crosscable W/#2 Halfball Ends
PD	Paddles mounted on ends of Crosscables
6Y	6"Legs on Y Cable Assembly
18Y	18"Legs on Y Cable Assembly
DF	Dual Feed W/2-Cords from 1-Canopy on Opposite side
SH	Shade Holder Accessory for Capturing Shade Frame Wire

Step 6: Send us your part# using the form below.� All part #'s begin with CC.� If you need a different cable diameter than 1/16", please note in the additional comment box and one of our staff will be in touch with you.