• 1- MP Crossbar: Mono Point Base Crossbar
• 1-#32: 8/32″ x 5/16″ Ground Screw
• 1-#276B SQ: 5″ Square Canopy w/1.180″ CH
• 1-#133: 1/8″IP Hex Nut 1/8″ Thick
• 1-#183: 8/32″ x1/4″ Phillips Zinc Screw
• 1-MP PLATE HB: Mono Point Crossbar Center Plate
• 1-272 ADJ: 1/8″IPS Adjustable Half Ball
• 1-MP SWIVEL CLIP: Mono Point Retaining Clip
• 1-#237: 7/8″ Hole Bushing
• 2-Magnet: #6 & #8 Holes
• 2-#271: 6/32″ x 1/4″ L Flat Head Screw
• 2-#273: 8/32″ x .3235″ L Half Dog Point Set Screw
• MP-SW1/8 MAG ADJ Assembly Drawing
• The MP-SW1/8 MAG ADJ TK  includes an 5/64″ Tool Kit which has a (Allen Wrench 5/64 & 1/8 Drill Bit)

• 1- MP Crossbar: Mono Point Base Crossbar
• 1-#32: 8/32″ x 5/16″ Ground Screw
• 1-#276B SQ: 5″ Square Canopy w/1.180″ CH
• 1-#133: 1/8″IP Hex Nut 1/8″ Thick
• 1-#183: 8/32″ x1/4″ Phillips Zinc Screw
• 1-MP PLATE HB: Mono Point Crossbar Center Plate
• 1-272 ADJ: 1/8″IPS Adjustable Half Ball
• 1-MP SWIVEL CLIP: Mono Point Retaining Clip
• 1-#237: 7/8″ Hole Bushing
• 2-Magnet: #6 & #8 Holes
• 2-#271: 6/32″ x 1/4″ L Flat Head Screw
• 2-#60-1.5: 1/8″ IP Nipple 1.5″ L
• MP-SW1/8 MAG Assembly Drawing

***Kits are available in Micro Version using a 3.5″ Canopy.  “MICRO” is Pre-fix of Part #